If you’re dealing with a dead battery, don’t panic. A quick jumpstart can bring your battery back to life, and it’s surprisingly easy. Really! All you need is a set of jumper cables and a car with a working battery.

Keep reading to learn how to jumpstart your car.

How to Jumpstart Your Car

  1. Park the working vehicle next to the car that needs a jump. Don’t let the vehicles touch, or it could cause a short.
  2. Put both cars in park and turn off their ignitions.
  3. In both cars, turn off lights, the radio, air conditioning, things plugged into power outlets, and anything else that can drain power from the battery.
  4. Before going any further, take a look at both batteries. If either battery is cracked or leaking, do not attach jumper cables. The battery could explode.
  5. Locate the dead battery’s positive and negative terminals. Luckily batteries are usually clearly labeled with + and – signs, so they should be easy to find!
  6. Connect the jumper cables. Attach one red clamp to the dead battery’s positive terminal, and the other red clamp to the working battery’s positive post. Connect the black clamp to the working battery’s negative post, and the other black clamp to any solid, unpainted metal surface inside the dead vehicle’s engine compartment, like a nut on the engine block. Don’t worry if you see a spark after connecting the negative cable. It’s totally normal.
  7. Make sure the cables are secure and not touching any moving engine parts.
  8. Start the working car. Let it idle for a few minutes to feed power into the dead vehicle’s battery.
  9. Check that you have the cables set up correctly by turning on the dome light in the dead vehicle. If it turns on, they’re good!
  10. After a few minutes, start the dead vehicle and let them idle together. If the engine is cranking but won’t turn over completely, give it a few more minutes and rev the engine of the working vehicle.
  11. Once the dead car is running smoothly, it’s time to remove the jumper cables. Be careful not to let the clamps touch each other, or you could be in for a serious shock. Disconnect the jumper cables in the reverse order you connected them: black clamps first, then red.
  12. You’re good to go! Allow the dead vehicle to run for at least 30 minutes. This gives the battery time to recharge. Make sure you drive the vehicle somewhere safe before shutting it off in case you have to jump your battery again.

Remember to always keep a set of jumper cables in your car emergency kit to help you and other drivers!

Jumpstarting a battery is easy, but what about other roadside emergencies? Stay safe by making sure your car insurance policy includes Roadside Assistance. That way, you’re covered if you ever get a flat tire, lock your keys in your car, or your battery dies and you don’t have jumper cables handy.

Adding Roadside Assistance to your car insurance policy is simple with ABC Insurance Agencies. We’ve been protecting drivers in Louisiana and Texas for more than 30 years. To learn more about adding Roadside Assistance to your policy or to get a free auto insurance quote, call 1-800-708-0123, click, or come in to meet with a friendly agent today!

 

The information provided in this blog is designed to give helpful advice on the topic discussed. It is not intended to provide legal or any other type of advice and is not meant to be a thorough discussion of every issue that a person should consider or may encounter. ABC is not responsible or liable for the availability of links to websites or resources, or for any content, advertising, products, services or other materials on or available through these websites or resources or your reliance thereon. Any references to third party rates or products are subject to change without notice. Trademarks are property of their respective owners. ABC Insurance Agencies-members of the National General Insurance Group, Winston-Salem, NC.

(Visited 105 times, 1 visits today)